Product details
Capacity:
1.Single roll unwinding : 1.5 ream/min (900 ream/day)(2.25 ton paper/day)
2.Double roll unwinding : 3 ream/min (1800 ream/day)(4.5 ton paper/day)
3.Four roll unwinding:6 ream/min(3600 ream/day)(9 ton paper/day)
Technical Parameter
Model |
TO-1100 |
The max jumbo roll diameter |
φ1400mm |
The max jumbo roll width |
1100mm |
Cutting length |
20-1200mm,A3,A4 |
Speed |
20-200 times/min |
Material GSM |
40-450gsm |
Precision |
±0.2mm |
Feeding Roll |
One Rolls |
Capacity |
1.5 bags/min |
Power |
9.5KW |
Voltage |
380V/50HZ（Other can be customize) |
Weight |
4500kg |
Dimension(L×W×H) |
6200×3300×1400 |
Characteristic:
●The machine adopts servo motor,frequency controlling speed.PLC Control System,including automatic tension control,automatic counting,setting cutting size,automatic stop by setting time&number and other many functions.
●Unwinding jumbo roll part use automatic air shaft(3/6 inch,optional) or shaft-less(3/6 inch,optional)
●Unwinding jumbo roll part adopts EPC system,automatic correcting web material position and keeping high cutting precision.
●Machine shelf adopt casting steel,guillotine knife use heavy casting structure,traction rollers use static balance processing aluminum rollers.
●Automatic stacking&trimming finished sheets,using two stage motors to convey sheets to broadside.The convey broadside model machine can link to automatic packaging machine.
Our technology about solve the paper be messy when be conveyor:
Solution:A stacked paper conveying mechanism, comprising a frame 1, and the frame 1 is arranged in sequence according to the advancing direction of the paper.
There are a front conveyor belt 2, a counting device 3, a rear conveyor bracket 4, and several front conveyor belts 2 are evenly spaced, and the rear conveyor bracket 4
There is a rear conveyor belt 401 corresponding to the front conveyor belt 2 , and the rear conveyor belt 401 is driven by a motor 402 arranged at the end of the rear conveyor bracket 4
Driving operation, the upper surface of the rear conveyor belt 401 is lower than the discharge end of the counting device 3, and the front conveyor belt 2 will be cut and transversely cut.
The paper is transported to the counting device 3 for counting, and the counted paper enters the rear conveying belt 401, and the rear conveying bracket 4 is provided with
The paper stopper 5, the paper stopper 5 includes a paper stopper 504 arranged in the gap of the rear conveyor belt 401, and the paper stopper 504 is fixedly installed in the gap.
Our New technology about the slitting cutter change:we must disassembly the Active and passive axes before change the slitting cutter,this new design can solve this troublesome operation.
Solution:A quick-change cutter structure of a slitting machine, including 1, 2 installed on the 1, and a
Including the 3, 4, 6, 15 is installed on the 3, the 5 is installed on the 4, and the driven shaft is
4 can be rotatably installed on one end of the 7, the other end of the 7 is fixedly installed on the 6, and the 6 and the worm gear reduce
The output shaft of the9 is linked, the input shaft of 9 is installed with 8, and 9 is fixedly installed on the wall.
On the plate 2, the 3 and 4 are linked through the 16, and 17 is installed on one of 2 to pair the main shaft.
http://www.takeoff-machinery.com/
